Ricoh OR-C1 Field Service Manual page 567

Displays the status of the certification update.
0 The certification used by Embedded RC Gate is set correctly.
The certification request (setAuthKey) for update has been received from the GW
1
URL and certification is presently being updated.
The certification update is completed and the GW URL is being notified of the
2
successful update.
The certification update failed, and the GW URL is being notified of the failed
3
update.
The period of the certification has expired and new request for an update is being
4
sent to the GW URL.
1 A rescue update for certification has been issued and a rescue certification setting
1 is in progress for the rescue GW connection.
1 The rescue certification setting is completed and the GW URL is being notified of
2 the certification update request.
The notification of the request for certification update has completed successfully,
1
and the system is waiting for the certification update request from the rescue GW
3
URL.
1 The notification of the certification request has been received from the rescue GW
4 controller, and the certification is being stored.
1 The certification has been stored, and the GW URL is being notified of the
5 successful completion of this event.
1 The storing of the certification has failed, and the GW URL is being notified of the
6 failure of this event.
The certification update request has been received from the GW URL, the GW
1 URL was notified of the results of the update after it was completed, but a
7 certification error has been received, and the rescue certification is being
recorded.
1 The rescue certification of No. 17 has been recorded, and the GW URL is being
8 notified of the failure of the certification update.
System SP Tables-5
4
209