Ricoh OR-C1 Field Service Manual page 604

4. Appendix: Service Program Mode Tables
Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full
(Professional)", is installed.
5974*
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
Device Setting
The NIC and USB support features are built into the GW controller. Use this SP to enable
5985
4
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
On Board NIC
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is limited only for the NRS or
1
LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT authentication are not available
On Board USB
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Mech. Counter
This SP detects that a mechanical counter device is removed. If it is detected, SC610
5987*
occurs.
0: OFF. 1: ON
246
when this SP is set to "2". Even though you can change the initial settings of those
network applications, the settings do not work.