Ricoh OR-C1 Field Service Manual page 538

4. Appendix: Service Program Mode Tables
Set Bypass Paper Size
Turn on or off the paper size confirmation pop-up on the LED. This pop-up prevents
mismatching between a paper size selected by the operation panel and an actual
5071
paper size on the by-pass tray.
[0 to 1 / 0 / 1]
0: Off, 1: On
1 PCU
A3/DLT Double Count (SSP)
4
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the
5104*
bypass tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is A4
x2 and LT x2 respectively.
5113* Optional Counter Type
Default Optional Counter Type
Selects the type of counter:
0: None
1: Key Card (RK3, 4) Japan only
2: Key Card Down
1
3: Pre-paid Card
4: Coin Lock
5: MF Key Card (Must be enabled with SP5114)
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
5114* Optional Counter I/F
MF Key Card Extension
Use this SP to change the setting to "1" only when the "5" (MF Key Card) is selected
1
with SP5113-001.
[0: Not installed/ 1: Installed (scanning accounting)]
180