Ricoh OR-C1 Field Service Manual page 455

No. Type
Corner stapler motor error (D585)
The machine does not detect a correct signal from the stapler HP sensor while the
stapler motor is operating. The 1
failure issues this SC code.
• Staple jam
798
B
• Motor overload
-06
• Defective stapler motor
1. Check the connections and cables for the components mentioned above.
2. Replace the HP sensor and/or stapler motor
3. Replace the finisher main board.
No. Type
Stapler movement motor error (D585)
The machine does not detect a correct signal from the stapler home position sensor
while the stapler movement motor is operating. The 1
jam error, and the 2
• Motor overload
• Loose connection of the stapler home position sensor
798
• Loose connection of the stapler movement motor
B
-07
• Defective stapler home position sensor
• Defective stapler movement motor
1. Check the connection of the stapler movement motor.
2. Check the connection of the stapler home position sensor.
3. Replace the stapler home position sensor.
4. Replace the stapler movement motor.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
st
detection failure issues a jam error, and the 2
Details (Symptom, Possible Cause, Troubleshooting Procedures)
nd
failure issues this SC code.
Service Call Conditions
st
detection failure issues a
nd
3
97