4. Appendix: Service Program Mode Tables
1 Writing
3 Initialize
SD Card Apli. Move
5873
Allows you to move applications from one SD card another. For more, see "SD Card
Appli Move" in the chapter "System Maintenance (Main Chapters).
1 Move Exec
2 Undo Exec
4
SC Auto Reboot
5875*
This SP determines whether the machine reboots automatically when an SC error occurs.
Note: The reboot does not occur for Type A, B or C SC codes.
1 Reboot Setting
2 Reboot Type
Option Setup
5878
Use this SP to enable the Data Overwrite Security option or HDD Encryption Option
after installation.
1 Data Overwrite Security
2 HDD Encryption
Editing Option Setup DFU
5879
This SP is used to install the edit option card.
5881
Fixed Phase Block Erasing DFU
242
Rewrites the common certification used for the @Remote.
Initializes the set certification.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
[0 to 1/ 0 / 1]
0: The machine reboots automatically after the machine issues an SC
error and logs the SC error code. If the same SC occurs again, the
machine does not reboot.
1: The machine does not reboot when an SC error occurs.
[0 to 1 / 0 / 1]
0: Manual reboot, 1: Automatic reboot