2. Installation
2. Go into the SP mode and do SP2-801 (Developer Initialization).
3. Do SP5-181 and SP1-007-007 to set automatic paper size selection for the upper tray, lower
tray, and by-pass tray.
Upper Tray (Size Adjust Tray 1)
5-181-001
2
5-181-002
5-181-003
5-181-004
5-181-005
Lower Tray (Size Adjust Tray 2)
5-181-006
5-181-007
5-181-008
5-181-009
By-Pass Tray (By-Pass Size Detection)
1-007-007
4. Enable the NIB and/or USB function.
• To enable the NIB function, enter the SP mode and set SP5-985-001 (On Board NIC) to
"1"(Enable).
• To enable the USB function, enter the SP mode and set SP5-985-002 (On Board USB) to
"1"(Enable).
5. Exit SP mode.
6. Do some test copies to make sure that the machine operates correctly.
Data Overwrite Security
Do the following procedure if a customer wants to use this function.
1. Do SP5-878-1(Option Setup - Data Overwrite Security) and touch [EXECUTE].
2. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
40
A4 LEF/LT LEF
A3/DLT
B4/LG
B5LEF/ExeLEF
A5SEF/HLTSEF
A4 LEF/LT LEF
A3/DLT
B4/LG
B5LEF/ExeLEF
LTSEF/LG
[0 to 1 / 0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
[0 to 1 / 0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
[0 to 1 / 0 / 1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)