Ricoh OR-C1 Field Service Manual page 545

Access Control DFU
5401*
This SP stores the settings that limit uses access to SDK application data.
103 Default Document ACL
104 Authentication Time
162 Extend Certification Detail
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
221 SDK3 Certification Method
230 Certification Device
Used to assign the default access user access
privileges to their own documents on the
document server.
[0 to 3 / 0 / 1 step]
0: View, 1: Edit, 2: Edit/Delete,
3: Full control.
Specifies the timeout of the authentication.
[0 to 255 / 0 / 1 sec./step]
0: 60 seconds
1 to 250 seconds
Selects the log out type for the extend
authentication device.
Bit 0: Log-out without an IC card
0: Not allowed (default)
1: Allowed
"SDK" is the "Software Development Kit". This
data can be converted from SAS (VAS) when
installed or uninstalled. DFU
Enables or disables the SDK certification.
• Bit 0: SDK certification
0: Disable (default), 1: Enable
• Bit 1: Not used
• Bit 2: Administrator log in
0: Disable (default), 01: Enable
System SP Tables-5
4
187