Ricoh OR-C1 Field Service Manual page 456

3. Appendix: Service Call Conditions
No. Type
798
B
-08
3
No. Type
798
B
-09
98
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Tray lift motor error (D585)
The machine does not detect a correct signal from the paper height sensor while
the Tray lift motor is operating. The 1
nd
2 failure issues this SC code.
• Motor overload
• Loose connection of the shift tray motor
• Defective shift tray motor
1. Check the connections to the tray lift motor.
2. Replace the tray lift motor.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Edge depressor solenoid error (D585)
Paper height sensor is ON when the edge depressor solenoid switches ON and
the edge depressors start lower. The 1
nd
the 2 failure issues this SC code.
• Solenoid harness loose, broken
• Solenoid obstructed
• Paper height sensor dirty, harness loose, broke
• Solenoid defective
• Paper height sensor defective
1. Check or replace the solenoid harness.
2. Check for blockages in the stack pressure mechanism.
3. Replace the paper height sensor.
st
detection failure issues a jam error, and the
st
detection failure issues a jam error, and