Ricoh OR-C1 Field Service Manual page 586

4. Appendix: Service Program Mode Tables
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a test error
6
occurs during document transfer with the NetFile application and an external device.
[0 to 999 / 300 / 1 sec]
IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary delivery server for
8
Scan Router. This SP lets you set only the IP address, and does not refer to the DNS
setting.
Delivery Server Model
4
Lets you change the model of the delivery server that is registered by the I/O device.
[0 to 4 / 0 / 1]
0: Unknown
9
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr. Capability
Changes the functions that the registered I/O device can do.
[0 to 255 / 0 / 1]
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
10
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr.Capability (Ext)
These settings are for future use. They will let you increase the number of registered
11
devices (in addition to those registered for SP5845 010).
There are eight bits (Bit 0 to Bit 7). All are unused at this time.
228