1. Setting Up the Machine Do not install or use this device in any area that does not have adequate ventilation as shown. 33 cm (13 inches) 20 cm 89.6 (7.9 inches) 20 cm (7.9 inches) Power Source 120 - 127 V, 60 Hz, 11 A or more 10 cm (4.0 inches) 70 cm...
Page 4
ECB022 ECB024 ECC029 ECC030 ECC031 ECC032 ECB025 ECB026 ECB027 ECB028 ECB030 ECB031 Language English German French ECB231 ECB032...
2. Configuring the Network Setting Check How the Computer Is Connected Specify how to connect to your computer according to the communication environment of your system. Which method do you want to use (wireless or wired)? Wireless Wired Connect using a Connect using an Use a router (access point)? USB cable...
Page 8
Connecting the Machine via Wi-Fi DUE079 Enter the encryption key using the [ ] or [ ] key, and then Easy Setup Using the Wi-Fi Setup Wizard press the [OK] key. From the control panel of this machine, you can also configure the Password wireless LAN settings for the machine.
Page 9
Connecting to the devices using the Open Easy Setup Using the WPS Button system or Shared Key authentication Enter the encryption key using the [ ] or [ ] key, and then ● Make sure the Ethernet cable is not connected to the press the [OK] key.
Page 10
10. Press the [ ] or [ ] key to select [Yes], and then press the Press the [ ] or [ ] key to select [Wired (Ethernet)], and [OK] key. then the [OK] key. Network Wizard WPS PBC Connect ? Wired (Ethernet) Wireless (Wi-Fi) ECB216...
Page 11
13. Execute WPS (PIN system) from the router (access point)’s web page. 14. Press the [ ] or [ ] key to select [Connect], and then press the [OK] key. PIN Code: XXXXXXXX Connect Abort ECB217 "Please wait for 2 minutes" appears and connecting with PIN method starts.
Page 12
Connecting the Machine via USB or Ethernet DUE077 DUE078 ● For details about IPv4 or IPv6 settings manually, see User's Guide. ● When connecting the machine via USB, USB cable is necessary to set up. Do not connect the cable until you are instructed to do so on the screen.
3. Installing the Printer Driver Follow the instructions in the setup wizard. If you already completed the Wi-Fi setting, click [The machine's ● If you connect the computer by a USB cable, do not IP address has been already configured.]. connect the cable until you are instructed to do so on the screen.
Control Panel Sheet 1 [Wi-Fi Direct] key 7 [OK] key 2 [Stop/Start] key 8 [Power] key 3 [Job Reset] key 9 [Back] key 4 [Menu] key 10 Alert Indicator 5 Display 11 Data In Indicator 6 Scroll Keys For safe and correct use, please be sure to read the Safety Information before using the machine.
Need help?
Do you have a question about the C125 P and is the answer not in the manual?
Questions and answers