Sanremo OPERA The Revolution Instruction Booklet page 104

OPERA
Coffee water temperature and unit (Fig. 21).
• Press button (1) on the first unit on the left for 10
seconds, until its LED flashes (2).
• The water temperature is shown in field "A" of the unit
display, while "Set." is shown in field "B" to indicate
that the temperature is being set; field "C" shows the
message "t1" which indicates that the water temper-
ature is being programmed.
• Use button (3) to decrease the temperature and
button (4) to increase it.
• To confirm the data that were set, press button (1) to
move to programming the dispensing unit tempera-
ture shown by the message "t2" in field "D".
• Adjust temperature "t2" in the same way as for pro-
gramming "t1" then press button (1) to confirm and
leave the programming stage.
• Adjust the temperatures "t1" and "t2" also for the
other units of the machine, as described above for
the first unit on the left.
EN
5.12.d - Barista programming by means
of a tablet
• Turn on the tablet provided with the machine; accord-
ing to the language set on the tablet the software will
be in Italian if the Italian language is set or in English
if any other language is set.
• Start the "Sanremo Opera Bar" app on the initial
screen, which will display the main screen;
Use this function to program starting and shutting down
the machine and the closing day.
This function can be used to display the number of
coffees dispensed by each unit and by each type of
dispensing, and partial counter can be reset.
Operation of the machine
A A
B B
C C
14 / 22
CAP. 5
Fig. 21
1 1
2 2
02-2014
D D