Copy & Paste - SoundCraft Si Compact User Manual

COPY & PASTE
This facility allows almost any processing section to be copied easily and quickly from a
channel or bus and pasted to another channel or bus.
To copy a channel or bus: SELect your source channel or bus and making any changes
before pressing COPY & PASTE. Pressing the COPY & PASTE button will copy all parameters
of the currently SELected channel or bus to the clipboard:
1
2
3
4
1. Copies channel or bus level & ON status.
2. Copies phase HPF filter and in/out status (where applicable).
3. Copies all gate parameters and in/out status (where applicable).
4. Copies all compressor parameters and in/out status.
5. Copies all parametric EQ parameters and in/out status.
6. Copies delay, pan and routing (where applicable).
7. Copies channel to bus or bus to matrix sends and on/off status (where applicable).
8. Copies GEQ (where applicable).
Elements of the channel or bus such as COMPressor may be toggled on/off of the clipboard
by touching the icon on the screen. To select a single item such as EQ press and hold the
EQ icon to toggle all other items off.
To paste the clipboard contents to another channel or bus press and hold the PASTE button
whilst pressing the SEL keys of the desired destination channels.
Copy sends from all channels to bus'n':
Pressing COPY & PASTE whilst in FOLLOW
mode or changing to FOLLOW mode whilst in
COPY & PASTE will copy to the clipboard bus
send levels and ON/OFF from all channels
to bus 'n'. To paste the contributions from
to another bus press and hold the PASTE
button whilst pressing BUS'n' key(s) of the
destination buses.
Soundcraft Si Compact User Guide 1211
5 6
7
8
37