Advertisement
CONNECTING THE SYSTEM
Audio Connections
Audio connections should be made as shown in the diagram below. ADAT optical cables must be
connected both from ADAT Out port of the Lagoon card to the 328XD ADAT In 17-24 and vice versa.
The optical plugs should remain in the 328XD ADAT port 25-32 input and output.
In this configuration, the ADAT connections allow digital transfer of either direct outputs from the 328XD's
input channels 1-8 to the Lagoon card, or the 328XD's 8 Group outputs.
Other Connections
You may also wish to connect the 328XD to the Lagoon card with MIDI cables to allow MIDI automation /
System Exclusive dumps from the 328XD to be recorded and played back from your PC.
If you wish to connect the 328XD MIDI I/O to the Lagoon, the following connections must be made:
2 2 2 2
Soundcraft 328XD and M-Audio Lagoon
Advertisement
