tOTEM™ (THE ONE TOUCH EASY MIX) KEYS
These keys place the console into 'MIX' mode allowing quick & easy mixing from Channels
to Buses, Channels to FX or Buses to Matrix. Pressing any key triggers a sequence of events
that re-configure the control surface and console monitoring system to the optimum layout
for the desired/required function.
NOTE: If selecting a tOTEM key whist there are no contributing channels or buses on
the active layer the surface will appear 'blank' — this is correct.
Mixes 1-14
Clears all current SOLOs.
•
Puts input faders into 'sends on faders' mode lighting FaderGlow according to the PRE
•
or POST setting of the send.
Places master for selected mix on the MONO/SEL fader lighting the FaderGlow according
•
to the Bus Sends Master PRE or POST setting..
SOLOs the selected bus.
•
Assigns the ACS to the selected mix.
•
NOTE: When mixing to an Aux or Matrix bus use ALT + 'ON' keys to set send level to
either unity if send is on or -inf if send is off.
NOTE: Send pre/post send from the channel to the mix may be changed whilst mixing
to buses using the PRE/POST button in the OUTPUTS/VCA page of the LCD main menu.
FX Mixes 1-4
Clears all current SOLOs.
•
Puts faders into 'sends on faders' mode lighting FaderGlow accordingly.
•
Places FX Return of fader for selected mix on the MONO/SEL fader lighting the FaderGlow
•
cyan indicating fader is related to the FX.
SOLOs the appropriate FX Return channel.
•
Assigns the ACS to the selected FX Return.
•
NOTE: This function may only be enabled if an FX processor is patched to a stereo
input; this is achieved from the PATCH function in the inputs window.
Matrix Mixes 1-4
Clears all current SOLOs.
•
Puts faders into 'sends on faders' mode lighting FaderGlow accordingly.
•
Places master for selected mix on the MONO/SEL fader lighting the FaderGlow orange
•
indicating fader is related to the matrix.
SOLOs the selected mix.
•
Assigns the ACS to the selected matrix mix.
•
NOTE: When mixing to an Matrix or Aux bus use ALT + 'ON' keys to set send level to
either unity if send is on or -inf if send is off.
NOTE: A second press of the active MTX key allows individual contributions to be sent
from left, right and mono buses to Matrix 'n' from faders 20, 21 & 22 (Si PERFORMER 2)
or 28, 29, 30 (Si PERFORMER 3).
22
Soundcraft Si Performer User Guide V1.1 1112