Labels - MINOLTA-QMS magicolor 2300 DL User Manual

T
Transparent windows
T
Too rough of a surface
T
Material that will melt, vaporize, offset discolor, or emit dangerous fumes
T
Been presealed

Labels

A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
T
The face sheet must follow the plain paper specification.
T
The face sheet surface must cover the entire carrier sheet, and no
adhesive should come through on the surface.
You can print continuously with label paper. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Format label data within your application. Try printing your data on a plain
sheet of paper first to check placement. Check your application
documentation for other information on printing labels.
Capacity
Orientation Face up
Type
Driver
Mode
Weight
Duplexing
Use label sheets that are
T
Recommended for laser printers
T
Letter or A4 size (adhesive label stock)
Do not use label sheets that
T
Have labels that easily peel off
T
Have the backing sheets that have peeled away or have exposed
adhesive
Labels may stick to the fuser, causing them to peel off and media jams
to occur.
Media Types
Tray 1 Up to 50 label sheets, depending on their thickness
Tray 2 Not supported
Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
Labels
16–90 lb (60–163 g/m²)
Not supported
15