Configuring Network Protocol - Muratec MFX-C4000 Field Engineering Manual

7.3.3 Configuring network protocol by using the SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the
network printer card or interface. Especially, it is for the network administrator to set several network IPs at
the same time.
7.3.3.1 Installing the program
1. Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the
window.
2. Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.)
3. Double click Application > SetIP.
4. Open the folder of the language you plan to use.
5. Double click Setup.exe to install this program.
6. Follow the instructions in the window and complete the installation.
7.3.3.2 Understanding the window
Refresh Set TCP/IP
List of detected devices
Service Manual
Installation
Set Manually
About About
Close the program
7-35
Display the Help of program