Muratec MFX-C4000 Field Engineering Manual page 68

4. Pull the waste toner container out of the machine
using its handle.
5. Turn the imaging unit locking levers outwards to
release and open the inner cover.
6. Pull the used imaging unit out of the machine
using the handle on its bottom.
Service Manual
Maintenance and Disassembly
7. Remove the new imaging unit from its bag.
8. Remove the paper protecting the surface of the
imaging unit.
9. Remove the cap, and carefully pull the seal
tapes out of the imaging unit.
10. Thoroughly shake the new imaging unit side to
side five or six times.
11. Labels inside the machine identify each imaging
unit's position.
Holding the handles on the new imaging unit,
push the imaging unit until it locks in place.
3-6