Muratec MFX-C4000 Field Engineering Manual page 93

5. Open the Side Duplex Cover and the Front cover. And then remove the left side cover.
COVER- COVER-
SIDE LEFT SIDE LEFT
3.2.2.2 DADF
1. Remove one screw, and disassemble the cover.
2. Unplug the cable, and lift up the DADF from the
SET in the direction of arrow
Service Manual
Maintenance and Disassembly
SIDE-DUPLEX COVER SIDE-DUPLEX COVER
COVER-FRONT COVER-FRONT
3. Open the DADF cover, and remove the one
screw.
4. Lift up the stacker, and remove the two screws.
3-31