Muratec MFX-C4000 Field Engineering Manual page 96

3.2.2.4 Scan Ass'y
1. Remove the 2 screws from the Front dummy
cover and release it.
2. Remove the 4 screws from front-down side of
scan assy.
3 3
3. Remove the 3 screws and all harness connected
to scan assy.
Service Manual
Maintenance and Disassembly
2 2
1 1
4. Lift up and release the Scan Assy.
3 3
5. Release the Scan upper from the Scan lower
after remove the 6 screws (cap hole screw 3 EA)
3-34
2 2
1 1