Muratec MFX-C4000 Field Engineering Manual page 251

4. Select Components
Select Components : User can selects desired software components in Custom installation
■ Printer Driver : This component enables you to print documents. (Mandatory item)
■ Scanner Driver :This is a driver to scan documents using the local device (Mandatory item for MFP model)
■ Printer Settings Utility/Remote Control Panel : This component allows a user to change configuration
parameters
■ Network Scan: Allows you to scan through Network printer.
■ Set IP : Allows you to configure a network printer's IP address
■ Smart Panel : shows the current status of the printer.
■ Change Destination Folder: User can change the destination folder with using this button.
5. Set Printer
■ Shared Name : Allows a user to change the shared name. The shared name size is 8 characters
maximum.
■ Setting up this printer on a server : Check this option to set a computer sharing a printer with other
computer or server that manages printing operations.
Service Manual
Installation
■ Select components
■ Change Destination Folder
Note: The supported component varies depending on
Model
■ User can change the printer settings to be installed.
- Printer Name : A user can change the printer name.
- Port : A user can change the installed printer port
to other network port or a local port.
- Default Printer : If the installed printer drivers are
more than one, a user can change the default
printer.
7-9