Muratec MFX-C4000 Field Engineering Manual page 278

Installation
7.3.3.3 Stating the program
1. From the Windows Start menu, select Programs > Network Printer Utilities > SetIP.
2. Select the name of your printer and click "Set TCP/IP" on window.
Note
If you cannot find your printer name, click to refresh the list.
3. Enter the network interface's MAC address, IP address, subnet mask, default gateway, and then click
Apply.
Note
If you do not know the network interface's MAC address, print the machine's network information report.
4. Click OK to confirm the settings.
5. Click Exit to close the SetIP program.
7-36
Service Manual