Muratec MFX-C4000 Field Engineering Manual page 95

3.2.2.3 OPE
1. Remove the OPE cover. And remove the 3
screws.
2. Lift up the OPE assy as shown below, and
Unplug the connector. And release the OPE
assy from set.
Service Manual
Maintenance and Disassembly
3. Disconnect the 2 harness, 3 flexible pcb, and
remove the 4 screws. And then remove the OPE
PBA.
4. To remove the LCD panel, remove the 10
screws. Take out the LCD panel after remove the
LCD panel shield.
3-33