Finisher - Muratec MFX-C4000 Field Engineering Manual

7.2.7 Finisher

Product Spec.
Connection
< Mechanical connection >
(1) Paper Registration : Center Registration
(2) Docking alignment position : 3 Docking Pins and 2 Latches
< Electrical Connection >
(1) Control command : 3.3V
(2) Connection : D-Sub Connector (Rear side)
(3) Control specification : Gradco I/F Specification
< Power Supply >
(1) Power Supply : Engine supplies 24V / 5V / 3.3V to Finisher
(2) Input Power : 24V±10 , 5 ±5 , 3.3 ±5
(3) Rating Current : 24.0 V, 3.0 A (Peak 4.5A for 25ms MAX.)
5.0 V, 0.5 A
3.3 V, 0.6 A
Service Manual
Installation
(1) High Speed System
: 35ppm with minimized skip-pitches.
(2) Heavy Duty Design
: 50 sheets stapling
: 500 sheets stacking
: 1,000K Life
(3) Paper Spec.
: Length (148~357mm), Width (98-216mm)
(60~163gsm)
(4) Staple Cartridge : 5,000 staples / cartridge
(5) Configuration : Embed type
(6) Size
- Without Stacker : W 498 X D 390 X H 284 (mm)
- With Stacker : W 726 X D 390 X H 300 (mm)
(7) Weight : 11.2 kg (Net), 13.5 Kg (Gross)
7-25