Muratec MFX-C4000 Field Engineering Manual page 77

3.1.7.6 How to replace the MP pad Unit and MP feed roller
Before MP unit disassembly, you must remove the covers, Deve Drive unit, side duplex unit etc.
(refer to 3.2.2 general disassembly procedure.)
1. Remove the 1 screw. Remove the Bracket and
Gear as shown below.
Gear Gear
Gear Gear Gear Gear
Bracket Bracket
Bracket Bracket Bracket Bracket
3. Remove the 4 screws and 2 hooks and take out the MP Assy.
Service Manual
Maintenance and Disassembly
Hook Hook Hook Hook
Hook Hook Hook Hook Hook Hook Hook Hook
3-15
2. Remove the MP pad unit after remove the 1
screw.
Left Left
Left Left Left Left
Right Right
Right Right Right Right