Muratec MFX-C4000 Field Engineering Manual page 179

Message
Original paper does not
feed in scanner
Original paper is too long
for scanner. Check size
Original paper jam in front
of scanner duplex path
Original paper jam in front
of scanner
Original paper jam inside
of scanner duplex path
Original paper jam inside
of scanner
Service Manual
Alignment & Troubleshooting
Meaning
The lead edge of the document
failed to actuate the scan sensor
within the correct time after
actuating the registration sensor.
Oversized document or double-
feeding of originals.
Paper has jammed during duplex
printing in the DADF.
The originals are jammed in DADF
1. The lead edge of the document
failed to actuate the reverse
stack sensor within the correct
time after actuating the gate
sensor.
2. The edge of the document failed
to actuate the reverse stack
sensor.
The lead edge of the document
failed to actuate the gate sensor
within the correct time after
actuating the scan sensor.
When the machine is on, jammed
paper is detected in the DADF.
Suggested Solutions
1. Open the DADF door. And remove the
jammed paper. Close the DADF door.
2. Open the platen door and remove the
jammed paper.
3. Open the reverse stack door and remove
the jammed paper.
4. Check the paper exit.
1. Check the paper exit and remove the
jammed paper.
2. Open the Platen door and remove the
jammed paper.
3. Open the ReverseStack door and remove
the jammed paper.
4. Open the DADF door and remove the
jammed paper.
1. Open the DADF door. And remove the
jammed paper. Close the DADF door.
2. Open the platen door and remove the
jammed paper.
3. Open the reverse stack door and remove
the jammed paper.
4. Check the paper exit.
1. Remove the all document on DADF.
2. Remove the jammed paper in DADF.
1. Open the ReverseStack door. And remove
the jammed paper.
2. Open the platen door and remove the
jammed paper.
3. Open the DADF door and remove the
jammed paper.
4. Check the paper exit.
1. Open the DADF door. And remove the
jammed paper. Close the DADF door.
2. Open the platen door and remove the
jammed paper.
3. Open the reverse stack door and remove
the jammed paper.
4. Check the paper exit.
4-73