Muratec MFX-C4000 Field Engineering Manual page 205

3) JAM 1
Description : Paper is jammed at Fuser.
Registration Jam occurred.
Check where the jammed
paper is located
Lead edge of paper is located
between the Leg-M_Act Ready
DP and Leg- M_Actuator Exit?
Check if any object or obstruct is
on the path. If any, remove it.
End
Service Manual
Alignment & Troubleshooting
Leg-M_Act Ready DP
Photo Interrupter
HVPS
NO
Yes
OK
Leg-M_Actuator Exit
Photo Interrupter
Push the Leg-M-Act
Ready DP down, and
check if it returns back
quickly.
Yes
Does the Photo
Interrupter
(registration sensor)
work properly?
Yes
Check the Photo Interrupter
(Exit Sensor) works properly
or not.
NO
Replace HVPS
4-99
Replace the Leg - -
M_Act Ready DP
End
NO
Replace HVPS
End