General Disassembly - Muratec MFX-C4000 Field Engineering Manual

3.2.2 General Disassembly

3.2.2.1 Cover
1. Remove the 10 screws from the rear of SET.
2. Remove the 4 screws from the left side of SET.
And remove the Cover Panel MFP.
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
3. Remove the COVER-PANEL MFP.
Service Manual
Maintenance and Disassembly
M4X10 M4X10
M4X10 M4X10
M4X10 M4X10
M4X10 M4X10
M4X10 M4X10
Note :
In case of being installed the fax kit, remove the fax kit after
remove the 2 screws.
4. Remove the Cover rear and the Cover rear
lower.
5. Remove the 2 screws and then remove the Unit
Cover Top.
3-30
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
M3X10 M3X10
M4X10 M4X10 M4X10 M4X10
M4X10 M4X10
M4X10 M4X10
M4X10 M4X10