Table of Contents
Advertisement
Installation
7.2 Option Installation
Introduction
Your machine is a full-featured model that has been optimized to meet most of your printing needs.
Recognizing that each user may have different requirements, however, several accessories are
available to enhance your machine's capabilities.
This section includes Option table, description and installation of each option, etc.
Precautions
Disconnect the power cord
Never remove the control board cover while the power is being supplied on.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing
ANY internal or external accessories.
Discharge static electricity
The control board and internal accessories (network interface or DIMM) are sensitive to static electricity.
Before installing or removing any internal accessories, discharge static electricity from your body by touching
something metal, such as the metal back plate on any device plugged into a grounded power source. If you
walk round before finishing the installation,
repeat this procedure to discharge any static electricity again.
Ordering Options
To order authorized supplies or accessories, contact your local authorized dealer where you purchased
your machine to obtain information.
7-11
Service Manual
Advertisement
Table of Contents
Troubleshooting
