Rear Wheel Removal; Rear Wheel Inspection; Rear Wheel Installation; Shock Absorber - KYMCO SUPER8 50 2T Service Manual

14
. REAR WHEEL/REAR BRAKE/REAR

SHOCK ABSORBER

REAR WHEEL
REMOVAL
Remove the two exhaust muffler joint lock
nuts.
Remove the two exhaust muffler lock bolts.
Remove the exhaust muffler.
Remove the rear axle nut to remove the
rear wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial : 2.0mm replace if over
Axial : 2.0mm replace if over
INSTALLATION
Install the rear wheel and apply SAE30#
engine oil to the axle threads. Then, tighten
the rear axle nut.
Torque values:
Rear axle nut: 11.0～13.0kg-m
14-3
Rear Axle Nut
Rear Axle Nut
SUPER8 50 2T