5. ENGINE REMOVAL/INSTALLATION
Remove the engine mounting bolt and pull
out the engine.
ENGINE INSTALLATION
Reverse the "REMOVAL" procedures.
Apply grease onto the O-rings, oil seals
and bush).
ENGINE HANGER REMOVAL
Remove met-in box and carrier. ( Ö2-6 )
Remove the body cover, center cover and
rear fender A together. ( Ö 2-6)
Remove air cleaner. ( Ö 5-3)
Remove the two nuts of the right and left step
bar.
Remove the right and left step bar.
Remove the engine mounting nut and engine
hanger bolt (left side).
Remove the engine mounting bolt and engine
hanger bolt (right side).
Remove the starter motor. ( Ö18-3 )
Remove the engine hanger.
5-5
PEOPLE/PEOPLE S 250
Engine Mounting Bolt
Nuts
Step Bar
Bolt
Bolt
Engine Mounting Bolt
Nuts
Step Bar
Engine Mounting Nut