Ip/Mac Binding Edit - ZyXEL Communications UAG5100 User Manual

20.2.1 IP/MAC Binding Edit

Click Configuration > Network > IP/MAC Binding > Edit to open the IP/MAC Binding Edit
screen. Use this screen to configure an interface's IP to MAC address binding settings.
Figure 169 Configuration > Network > IP/MAC Binding > Edit
The following table describes the labels in this screen.
Table 108 Configuration > Network > IP/MAC Binding > Edit
LABEL
IP/MAC Binding Settings
Interface Name
Enable IP/MAC
Binding
Enable Logs
for IP/MAC
Binding
Violation
Static DHCP
Bindings
Add
Edit
Remove
#
IP Address
MAC Address
Chapter 20 IP/MAC Binding
DESCRIPTION
This field displays the name of the interface within the UAG and the interface's IP address
and subnet mask.
Select this option to have this interface enforce links between specific IP addresses and
specific MAC addresses. This stops anyone else from manually using a bound IP address
on another device connected to this interface. Use this to make use only the intended
users get to use specific IP addresses.
Select this option to have the UAG generate a log if a device connected to this interface
attempts to use an IP address not assigned by the UAG.
This table lists the bound IP and MAC addresses. The UAG checks this table when it
assigns IP addresses. If the computer's MAC address is in the table, the UAG assigns the
corresponding IP address. You can also access this table from the interface's edit screen.
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
This is the index number of the static DHCP entry.
This is the IP address that the UAG assigns to a device with the entry's MAC address.
This is the MAC address of the device to which the UAG assigns the entry's IP address.
UAG Series User's Guide
250