ZyXEL Communications UAG5100 User Manual page 386

The following table describes the labels in this screen.
Table 171 Configuration > UTM Profile > Content Filter > Profile > Add/Edit Filter Profile > Category
Service
LABEL
License Status
License Type
Name
Description
Enable Content Filter
Category Service
Action for Unsafe Web
Pages
Chapter 33 Content Filtering
DESCRIPTION
This read-only field displays the status of your content-filtering database
service registration.
Not Licensed displays if you have not successfully registered and activated
the service.
Expired displays if your subscription to the service has expired.
Licensed displays if you have successfully registered the UAG and activated
the service.
You can view content filter reports after you register the UAG and activate the
subscription service in the Registration screen.
This read-only field displays what kind of service registration you have for the
content-filtering database.
None displays if you have not successfully registered and activated the
service.
Standard displays if you have successfully registered the UAG and activated
the standard content filtering service.
Trial displays if you have successfully registered the UAG and activated the
trial service subscription.
Enter a descriptive name for this content filtering profile name. You may use 1-
31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Enter a description for the content filtering profile rule to help identify the
purpose of rule. You may use 1-31 alphanumeric characters, underscores(
or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
This field is optional.
Enable external database content filtering to have the UAG check an external
database to find to which category a requested web page belongs. The UAG
then blocks or forwards access to the web page depending on the configuration
of the rest of this page.
Select Pass to allow users to access web pages that match the unsafe
categories that you select below.
Select Block to prevent users from accessing web pages that match the
unsafe categories that you select below. When external database content
filtering blocks access to a web page, it displays the denied access message
that you configured in the Content Filter General screen along with the
category of the blocked web page.
Select Warn to display a warning message before allowing users to access
web pages that match the unsafe categories that you select below.
Select Log to record attempts to access web pages that match the unsafe
categories that you select below.
UAG Series User's Guide
386
), or dashes (-), but the first
_
),
_