Controller Screen; Ap Management Screen - ZyXEL Communications UAG5100 User Manual

9.2 Controller Screen

Use this screen to set how the UAG allows new APs to connect to the network. Click Configuration
> Wireless > Controller to access this screen.
Figure 94 Configuration > Wireless > Controller
Each field is described in the following table.
Table 53 Configuration > Wireless > Controller
LABEL
Registration
Type
Apply
Reset

9.3 AP Management Screen

Use this screen to manage all of the APs connected to the UAG. Click Configuration > Wireless >
AP Management to access this screen.
Figure 95 Configuration > Wireless > AP Management
Chapter 9 Wireless
DESCRIPTION
Select Manual to add each AP to the UAG for management, or Always Accept to
automatically add APs to the UAG for management.
Note: Select the Manual option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs. For details on how to handle rogue APs, see
APs must be connected to the UAG by a wired connection or network.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
UAG Series User's Guide
Section 7.16 on page
137
116.