ZyXEL Communications UAG5100 User Manual page 577

Table 275 Maintenance > Packet Flow Explore > Routing Status (continued)
LABEL DESCRIPTION
Destination This is the IP address(es) for the remote VPN network.
VPN Tunnel This is the name of the VPN tunnel.
The following fields are available if you click Policy Route in the Routing Flow section.
# This field is a sequential value, and it is not associated with any entry.
PR # This is the number of an activated policy route. If you have configured a schedule for the
route, this screen only displays the route at the scheduled time.
Incoming This is the interface on which the packets are received.
Source This is the source IP address(es) from which the packets are sent.
Destination This is the destination IP address(es) to which the packets are transmitted.
Service This is the name of the service object. any means all services.
Source Port This is the name of a service object. The UAG applies the policy route to the packets sent
from the corresponding service port. any means all service ports.
DSCP Code This is the DSCP value of incoming packets to which this policy route applies. See
12.2 on page 205
Next Hop Type This is the type of the next hop to which packets are directed.
Next Hop Info • This is the main route if the next hop type is Auto.
• This is the interface name and gateway IP address if the next hop type is Interface /
GW.
• This is the trunk name if the next hop type is Trunk.
The following fields are available if you click VPN 1-1 Mapping Route in the Routing Flow section.
# This field is a sequential value, and it is not associated with any entry.
Source This is the original source IP address(es). any means any IP address.
Destination This is the original destination IP address(es). any means any IP address.
Outgoing This is the name of an interface which transmits packets out of the UAG.
Gateway This is the IP address of the gateway in the same network of the outgoing interface.
The following fields are available if you click 1-1 SNAT in the Routing Flow section.
# This field is a sequential value, and it is not associated with any entry.
NAT Rule This is the name of an activated 1:1 or Many 1:1 NAT rule in the NAT table.
Source This is the original source IP address(es). any means any IP address.
Destination This is the original destination IP address(es). any means any IP address.
Outgoing This is the name of an interface which transmits packets out of the UAG.
Gateway This is the IP address of the gateway in the same network of the outgoing interface.
The following fields are available if you click Default WAN Trunk in the Routing Flow section.
# This field is a sequential value, and it is not associated with any entry.
Source This is the source IP address(es) from which the packets are sent. any means any IP
address.
Destination This is the destination IP address(es) to which the packets are transmitted. any means any
IP address.
Trunk This is the name of the WAN trunk through which the matched packets are transmitted.
Chapter 50 Packet Flow Explore
for more information.
UAG Series User's Guide
577
Section