The Wireless Frame Capture Screen - ZyXEL Communications UAG5100 User Manual

Figure 400 Maintenance > Diagnostics > Network Tool
The following table describes the labels in this screen.
Table 272 Maintenance > Diagnostics > Network Tool
LABEL
Network Tool
Domain Name or IP
Address
Test
Stop
Reset

49.7 The Wireless Frame Capture Screen

Use this screen to capture wireless network traffic going through the AP interfaces connected to
your UAG. Studying these frame captures may help you identify network problems.
Click Maintenance > Diagnostics > Wireless Frame Capture to display this screen.
Note: New capture files overwrite existing files of the same name. Change the File Prefix
field's setting to avoid this.
Chapter 49 Diagnostics
DESCRIPTION
Select PING IPv4 to to ping the IP address that you entered.
Select TRACEROUTE IPv4 to perform the traceroute function. This determines the
path a packet takes to the specified computer.
Type the IPv4 address of a computer that you want to perform ping or traceroute in
order to test a connection.
Click this button to start to ping or run a traceroute.
Click this button to terminate the current ping operation or traceroute.
Click this button to return the screen to its last-saved settings.
UAG Series User's Guide
569