The Vpn 1-1 Mapping Edit Screen - ZyXEL Communications UAG5100 User Manual

Table 98 Configuration > Network > VPN 1-1 Mapping (continued)
LABEL
Edit
Remove
Activate
Inactivate
Move
#
Status
User / Group
Pool Profile
Apply
Reset

15.2.1 The VPN 1-1 Mapping Edit Screen

Click Network > VPN 1-1 Mapping to open the VPN 1-1 Mapping > General screen. Then click
the Add or Edit icon to open the VPN 1-1 Mapping Add/Edit Policy screen where you can
configure the rule.
Figure 148 Network > VPN 1-1 Mapping > Add
Chapter 15 VPN 1-1 Mapping
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change a rule's position in the numbered list, select the rule and click Move to display a
field to type a number for where you want to put that rule and press [ENTER] to move the
rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
This field is a sequential value, and it is not associated with a specific entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the name of the user or user group object to which this rule is applied.
This field displays the name of the pool profile used by this rule.
Click this button to save your changes to the UAG.
Click this button to return the screen to its last-saved settings.
UAG Series User's Guide
228