Figure 81 Monitor > Wireless > Detected Device
The following table describes the labels in this screen.
Table 41 Monitor > Wireless > Rogue AP > Detected Device
LABEL
DESCRIPTION
Mark as Rogue
Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the
AP
Configuration > Wireless > MON Mode screen
Mark as Friendly
Click this button to mark the selected AP as a friendly AP. For more on managing friendly
AP
APs, see the Configuration > Wireless > MON Mode screen
#
This is the station's index number in this list.
Status
This indicates the detected device's status.
Device
This indicates the detected device's network type (such as infrastructure or ad-hoc).
Role
This indicates the detected device's role (such as friendly or rogue).
MAC Address
This indicates the detected device's MAC address.
SSID Name
This indicates the detected device's SSID.
Channel ID
This indicates the detected device's channel ID.
802.11 Mode
This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security
This indicates the encryption method (if any) used by the detected device.
Description
This displays the detected device's description. For more on managing friendly and rogue
APs, see the Configuration > Wireless > MON Mode screen
Last Seen
This indicates the last time the device was detected by the UAG.
Refresh
Click this to refresh the items displayed on this page.
Chapter 7 Monitor
UAG Series User's Guide
117
(Section 9.4 on page
144).
(Section 9.4 on page
(Section 9.4 on page
144).
144).