Control Panel - Fuji Xerox DocuPrint 3105 User Manual

Control Panel

No. Name
1 <Printer Settings> button
2 Display
3 <Ready> lamp
4 <Error> lamp
5 <Energy Saver> button
6 <Cancel Job> button
7 <OK> button
8
< > < > < > <
9 <Back> button
1
Online
Printer
12
Settings
Information
11
Print Menu
10
Pressed to display the menu screen.
Displays the status of the printer, menu options, and messages.
[Please Wait...] is displayed when the printer power is switched on. Print job is
available when the display message changes to [Ready to print].
It displays authenticated user ID for about 2 seconds when card authentication
is used.
Nothing will be displayed during Energy Saver Mode even if the printer power is
switched on.
Refer to
• "Control Panel Display" (P. 49)
Lights when the printer is ready to print.
Blinks or lights when an error occurs.
The lamp lights while the printer is in Energy Saver mode.
The printer exits Energy Saver mode by pressing this button.
The printer enters Energy Saver mode (Low Power mode) by pressing this
button during Standby state.
Note
• <Energy Saver> lamp may be kept lit for several tens of seconds if the printer
is switched off during Energy Saver mode.
Pressed to cancel printing the job.
Pressed to confirm the menu option selected on the menu screen. This button
is also used when printing reports/lists.
Pressed to advance to the next menu, item, or option.
> buttons
Note
• When using the <
holding down either button cycles through available settings at high speed.
To display a setting's default value, press <
Press this button while the menu screen is displayed to return to the previous
item.
2 3 4
Ready
Error
Energy Saver
Cancel Job
Back
9 8 7
Description
> and < > buttons to change the current setting,
2.1 Main Components and Functions
5
6
> and < > at the same time.
47