Ipv6 Connection Problems; Ipv6 Environment Printing Problems - Fuji Xerox DocuPrint 3105 User Manual

IPv6 Connection Problems

When SSL is enabled with CentreWare
Internet Services, specifying http://
[IPv6 address] does not result in a re-
direct to the https://[IPv6 address] site.
Secure watermark does not operate
correctly when printing over an IPv6
network.
The printer cannot communicate with
Windows operating systems supporting
IPv6.
The printer cannot be accessed when
specifying a link-local address.
Searches do not operate properly when
they pass through a router.

IPv6 Environment Printing Problems

A Windows shared printer cannot be
used by Windows operating systems
for IPv6 in an IPv6 network
environment that has no DNS servers.
Cannot perform IPv6 communication
under NetWare.
Symptom
Symptom
Cause/Remedy
When SSL is enabled, specify https://[IPv6 address].
Run under an IPv4 environment.
Secure watermark does no operate correctly under an IPv6
environment.
Use some Windows operating system supporting IPv6 to
speciy a fixed address.
Register the fixed IPv6 address on the printer as a
communication-enabled host address.
Add a scope ID to the link-local address.
When using Internet Explorer 7 with Windows Vista,
Windows 7 or Windows Server 2008 R2 to specify
fe80::203:baff:fe48:9010 for access, for example, add
Ethernet adapter local area connection number (8, for
example) of Windows Vista, Windows 7 or Windows Server
2008 R2 as the scope ID, and enter:
fe80::203:baff:fe48:9010%8.
When performing a search with SMB through a router, enter
the addressee address directly.
Multicast responses are limited to multicasts within the local
link (FF02::1).
Cause/Remedy
Register the printer's host name in the hosts file on the
Windows operating systems for IPx6.
Example Path:
Register in this file: C:\Windows\system32\driver\etc\hosts
Run under IPv4.
6.7 Network-related Problems
233