Printing Various Types Of Papers - Fuji Xerox DocuPrint 3105 User Manual

3.4

Printing various types of papers

The trays 1 - 3 accept plain paper and special media such as heavyweight paper, labels,
and transparencies.
This section describes how to print after changing the paper type settings of tray 1, 2, or 3.
The following procedures use Windows XP WordPad as an example.
Important
• The method for displaying the Properties dialog box varies depending on the application being used.
Refer to the documentation for the application.
Note
• Paper type setting method: " Setting the Paper Sizes of Trays" (P. 115) and " Changing the Paper Type
Settings of Trays" (P. 117).
• Loading settings to the printer driver: "2.5 Importing Printer Information to a Print Driver" (P. 54)
Automatically Printing after Changing the Paper Type
When the [Paper Type] settings match the loaded paper type in the tray, the printer will
select the appropriate tray based on the paper type setting you specified, even if you do not
specify a paper tray with the print driver.
This method makes it possible to request a print job without worrying about the type of paper
loaded in each paper tray.
In order to use this feature, use the control panel to configure paper type settings for the
printer trays.
1. On the [File] menu, select [Print].
2. Select the printer from the [Select Printer] list, and then click [Preferences].
3. Click <v> beside the [Paper] to display the options, and then select [Advanced Paper
Selection].
4. For [Paper Tray], select [Automatically Select].
5. For the [Paper Type], select the paper type to print.
6. Set the [Original Document Size].
3
3.4 Printing various types of papers
71