Table of Contents
Advertisement
3.
On the menu on the left, click [Security] > [Force Annotation] > [Create Text String].
The [Create Text String] screen is displayed.
4.
Enter text string to register.
Note
• You can enter up to 64 single-byte characters.
5.
After all the settings are completed, click [Apply].
Using the Audit Log
The Audit Log makes it possible to track when, by whom, and what type of operations were
performed on the printer. The Audit Log lets you monitor printer operations to detect
unauthorized use or attempted unauthorized use.
Important
• Fuji Xerox shall not be held liable for any damages due to use or inability to use the Audit Log feature.
Note
• Up to 50 entries are maintained in the log. When an the HDD Extension Kit (optional) is installed, up to
15,000 entries can maintained in the log. When the maximum number of log entries is reached, each
new entry causes the oldest entry to be deleted.
• The HTTPS setting must be configured in order to output the Audit Log. For details about the setting
procedure, refer to "Configuring HTTP Communication Encryption Settings" (P. 293) or the online help
for CentreWare Internet Services. This feature is not supported on the model available in China.
Enabling the Audit Log
In order to use the Audit Log, you first need to use the following procedure to enable it.
1.
Launch your web browser and access CentreWare Internet Services.
Note
• If you do not know how to access CentreWare Internet Services, refer to "1.6 Configuring the Printer
Using CentreWare Internet Services" (P. 38).
• If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2.
Click the [Properties] tab.
287
7.9 Security Features
Advertisement
Chapters
Table of Contents
