Table of Contents
Advertisement
Machine Installation
Do not locate this product where people
might step on or trip over the power cord.
Friction or excessive pressure may
generate heat and eventually cause
electric shock or a fire accident.
Never locate this product in the following
places:
• Near radiators or any other heat sources
• Near volatile flammable materials such
as curtains
• In the hot, humid, dusty or poorly
ventilated environment
• In the place receiving direct sunlight
• Near cookers or humidifiers
This product weighs 23.0 kg. When moving
it, always carry it by a team of two or more
persons to avoid mishandling or injury.
When lifting this product, face the front
panel and firmly grip the handholds
provided on both sides of the product.
Never lift it by gripping any other areas. It
will prevent you from dropping the product
and getting back ache or injuries.
Locate this product on a level and sturdy
surface that can withstand its weight.
Otherwise, if tilted, the product may fall
over and cause injuries.
Locate this product in a well-ventilated
area. Do not obstruct ventilation openings
of the product.
Keep the minimum clearance as follows for
ventilation and an access to the power
plug. Unplug the product if an abnormal
condition is noted.
Do not incline the product at more than 10
degree angle. Otherwise, it may fall over
and cause injuries.
Others
To keep this product in a good performance
and condition, always use it in the following
environment:
• Temperature: 10 - 32°C
• Humidity: 15 - 85%
(no dew condensation)
When the product is left in a chilly room and
the room is rapidly warmed up by heater,
dew condensation may form inside the
product and cause a partial deletion on
printing.
To bundle wires and cables, always use the
cable ties and spiral tubes that Fuji Xerox
supplies. Otherwise, it may cause some
defects.
Unit: mm
15
Safety Notes
Advertisement
Chapters
Table of Contents
