Error Messages And Error Codes; Error Messages (In Alphabetical Order) - Fuji Xerox DocuPrint 3105 User Manual

6.6

Error Messages and Error Codes

Error Messages (in Alphabetical Order)

The following table lists the error messages that appear on the control panel.
Note
• If the message text cannot fit on a single screen, use the <
Message
Automatically select
available paper type
Press OK to print
Or, use Cancel Job
Check the bypass tray guides
• Check if the paper guides or
the size of the loaded paper are
correct. (Return with the
button.)
Check the bypass tray
<size + orientation> <paper
quality>
• Check the dial of the bypass
tray for paper size/orientation,
and make the appropriate
setting. (Return with the
button.)
Check the bypass tray <size +
orientation> <paper quality>
• Return to the previous screen,
check if the paper displayed on
the screen has been loaded
into the bypass tray, and if so,
press [OK]. (Return with the
button.)
Check the bypass tray paper size.
Check the guides of tray N
• Check if the paper guides or
the size of the loaded paper are
correct.(Return with the
button.)
(N: any of 1 to 3)
Check the paper in the bypass
tray.
• Paper of a type different than
that set has been loaded.
(Return with the button.)
The type of paper specified in the print driver is not loaded in the paper tray. Press
the <OK> button on the control panel to print on a different type of paper, or press the
<Cancel Job> button to cancel printing.
The bypass tray guides have been set incorrectly or the incorrect paper has been
loaded into the tray.
Referring to the message, set the bypass tray guides correctly or load the correct
paper.
The correct paper is not loaded into the bypass tray.
Load the correct paper into the bypass tray according to the displayed size,
orientation, and paper quality.
Note
• Press the button to display detailed information on the control panel.
Refer to
• "Loading Paper in the Bypass Tray" (P. 107)
The paper is not loaded correctly into the bypass tray.
Load the correct paper into the bypass tray according to the displayed size,
orientation, and paper quality.
Note
• Press the button to display detailed information on the control panel.
Refer to
• "Loading Paper in the Bypass Tray" (P. 107)
The paper size of the bypass tray is incorrect. Check the paper size and load the
correct paper.
Check paper tray N. Check if the positions of the paper guides and the paper size are
correct.
A different type of paper has been loaded into the bypass tray.
After checking that the correct paper type has been set, load the paper.
> and < > buttons to change screens.
Symptom/Cause/Remedy
6.6 Error Messages and Error Codes
209