Changing The Settings; Basic Procedure - Fuji Xerox DocuPrint 3105 User Manual

Changing the Settings

Basic Procedure

To display a menu screen or to move up and down the menus to make the printer settings,
use the following buttons on the control panel.
(print screen)
Ready to print
Note
• Once you save a value by pressing the <OK> button, a "•" mark appears before the value. To change the
value, return to the initial screen and repeat the preceding steps.
• To enable the settings of some items, the printer sometimes must be restarted. In this case, the printer
automatically restarts when the menu screen is exited.
Resetting a Value to Its Default
For items to change numeric values with the < > or < > button, press the < > and < >
buttons simultaneously to reset a value to its default.
The value changes to its factory setting. To accept the value, press the <OK> button.
Press to display the menu screen
(menu screen)
<Printer Settings>
Settings
LanguageEmulation
< >
Settings
Admin Menu
<OK>/< >Press to display a lower hierarchy
<Back>/< >Press to display a higher hierarchy
<Menu> Press to close the menu screen
Press to display the menu items in the same hierarchy
< >
<OK>/< >
Admin Menu
Network/Port
<Back>/< >
5.1 Overview of the Common Menus
(option selection screen)
Port Status
Enabled
<OK>
Press to accept
the selection
appears before already
set options.
123