Mm / Inches - Fuji Xerox DocuPrint 3105 User Manual

Hide thumbs Also See for DocuPrint 3105:
Table of Contents

Advertisement

[PrintcartridgeLifeEnd]
Printcartridge Life
End
* :
The page yield of each consumable varies depending on print requests, documents printed, how often
the power is switched on/off or temperature and humidity of the environment where the printer is
located. For more information, refer to "A.3 Life of Consumables and Regular Replacement Parts"
(P. 327).

[mm / inches]

mm / inches
162
5 Control Panel Settings
System Settings
PrintCartridgeLifeEnd
Setting
There are two types of print cartridge (6K and 0K), with respective lives of
6,000 pages and 10,000 pages.
When the time to replace the print cartridge is near, a message appears
indicating to have a replacement ready, approximately 650 ± 350 pages
before the cartridge reaches the end of its life. Approximately 100 pages before
the end of its life, another message appears indicating that the cartridge soon
needs to be replaced.
Select whether or not to cancel printing when a print cartridge has reached its
replacement cycle.
• [Cancel Printing]
After the print cartridge replacement message appears, printing is disabled
until the print cartridge is replaced with a new one.
• [Continue to print] (default)
Even when the [Replace the print cartridge] message is displayed, printing
does not stop. You can continue printing, but the toner may run out during
printing or your prinouts may be faded. If this happens, remove the cartridge
out of the printer and shake it. This may allow you to print some more pages
before the toner runs out completely. For information on how to shake the
cartridge, refer to " Output is too light" (P. 240).
System Settings
mm / inches
Setting
Sets the unit of measure for lengths displayed or entered on the control panel.
• [Millimeter(mm)] (default)
• [Inches (")]
Description
Description

Advertisement

Table of Contents
loading

Table of Contents