Print Position Adjustment - Fuji Xerox DocuPrint 3105 User Manual

Supported OS
The dedicated driver or utility software is not provided for the following operating systems.
You may install a driver or utility software for other operating systems, however, it may not
work properly.
• Microsoft Windows 95
• Microsoft Windows 98
• Microsoft Windows Me
• Windows NT 4.0
• Mac OS 8.1/8.5/8.6
• Mac OS X 10.3.8 or before
• MacOS X 10.4.7
• Windows NT Server 4.0
• Windows NT Server Terminal Edition
PostScript Print Driver for Macintosh
• Because the print drivers for Mac OS X 10.3.9 to 10.4.11/10.5/10.6 (except for 10.4.7)
adopt Plug-ins, the User Details Setup, Secure Print, Sample Set, Delayed Print, and
Print Stored File features are available.
• For the print drivers for Mac OS 9 (without Plug-ins), Accounting Settings, Secure Print,
Sample Set, and Delayed Print are not available. For the other restrictions, refer to the
manual or Readme included in the PostScript Driver Library CD-ROM.
• For Mac OS X 10.3.9 or Mac OS 9.2.2, if you print a document with odd number of pages
2-sided, a blank page will be added after the last page, and the blank page will be counted
as one page.
Printed Time in Force Annotation
The time you specified to print a job, the time at which the print job is started inside the
machine, and the time at which the job is actually printed may not be coincident with one
another depending on the machine status and settings or the content of the print job. The
time printed in Force Annotation is the time at which the print job is started inside the
machine.

Print position adjustment

• If there is a gap/shear in printing between front side and back side of a paper, only vertical
direction against the edge to be bound can be corrected. For example, when printing a
document in portrait orientation, with specifying both [2-Sided Print] and [Flip on Long
Edge], you can correct the shear horizontally but vertically as the front and back side
move to the same direction together in the vertical position adjustment.
• Adjustment of position per page is not available when [Pages Per Sheet (N-Up)] is
selected.
Print orientation when printing mixed-size documents
• Three types of combination such as A4 with A3, B5 with B4, and 8.5 x 11" (Letter) with
11 x 17" (Tabloid) are available when printing mixed-size documents via print driver.
• The mixed-size documents may be printed upside down depending on the combination
of the mixed-size documents, since the printer cannot determine the document
orientation (portrait, landscape) properly based on the application in use.
A.13 Notes and Restrictions
357