Printer Settings; Substitute Tray - Fuji Xerox DocuPrint 3105 User Manual

[Printer Settings]

The [Printer Settings] menu allows you to set paper trays and the Auto Tray Selection
feature.
Note
• Refer to "Auto Tray Selection Feature" (P. 118) for more information about the Auto Tray Selection
feature.

[Substitute Tray]

Substitute Tray
[PaperTypeMismatch]
PaperTypeMismatch
174
5 Control Panel Settings
Printer Settings
Substitute Tray
Setting
Sets whether or not to switch to another paper tray if the paper tray selected by
the Auto Tray Selection feature runs out of paper. When using this feature, set
the paper size for the substitute tray.
• [Off] (default)
Does not substitute the tray, and displays a message prompting to load
paper into the paper tray.
• [Use Larger Size]
Switches to another paper tray that contains paper that is one size larger
than the size requested, and prints documents at 100% zoom ratio.
• [Use Closest Size]
Switches to another paper tray that contains paper of size closest to the size
requested, and prints documents at a reduced zoom ratio if necessary.
• [Select Bypass Tray]
Switches to the bypass tray, and prints documents on the paper loaded in the
bypass tray.
Note
• These settings will be overridden by requests sent from computers.
Printer Settings
PaperTypeMismatch
Setting
Sets the action to take when there is no paper tray loaded with the paper type
specified in the print job.
• [PaperSupply Screen]
The message prompting you to change the settings for type of paper is
displayed.
• [ConfirmationScreen] (default)
The message prompting you to make sure the type of paper is displayed.
• [Print]
The print job is proceeded with the currently specified paper type without
showing any messages.
Description
Description