Table of Contents
Advertisement
7.13
Moving the Printer
Use the following procedure when moving the printer.
1.
Switch off the power of the printer by pressing the<
located on the left side of the printer.
2.
Unplug the power cord, interface cable, and all the other cables from the printer.
3.
Remove the paper from the bypass tray and close the bypass tray. Rewrap the paper
and store it away from dust and humidity.
4.
Pull out the trays from the printer, and remove any paper in them. Re-wrap the paper
and store it away from dust and humidity.
5.
Push the trays all the way back into the printer.
6.
Lift the printer and carefully move it. If moving over a long distance, pack the printer in
a box.
CAUTION
• When lifting the printer, bend at knees to avoid back injury, grip the printer at the
specified handholds, and then lift straight up.
Important
• The machine (including the consumables) weighs 23kg. At least three people should participate in lifting
the printer to move it.
• If optional trays are installed, remove them before moving the printer. If trays are not installed securely,
they may fall and cause injuries. For information on how to remove the trays, refer to the installation
guide provided with the options.
Note
• It is not needed to remove the consumables such as print cartridges when moving the printer.
> side of the power switch
7.13 Moving the Printer
317
Advertisement
Chapters
Table of Contents
