Enabling High Availability; Configuring High Availability - McAfee SG310 Administration Manual

Network Setup menu options
High Availability

Enabling high availability

From the Network Setup menu, select Network Setup > Failover & H/A > High Availability
1
(Figure 78).
Figure 78 High Availability page
Select the Enable High Availability checkbox.
2
[Optional] If you are customizing the script for high availability, change the HA path from /bin/highavaild
3
to /etc/config/highavaild. For further details, refer to
Click Submit. An action successful message is displayed. You can now configure the HA connection for
4
each interface. See
Disabling high availability
From the Network Setup menu, click Network Setup > Failover & H/A > High Availability tab.
1
Clear the Enable High Availability checkbox.
2
Click Submit. An action successful message is displayed.
3

Configuring high availability

Use this procedure to configure high availability for an interface.
Note: Both UTM Firewall appliances must have an identical HA configuration, including the list of interfaces,
shared IP addresses, and the interface configured as the checked interface.
From the Network Setup menu, select Network Setup > Failover & H/A > High Availability
1
(Figure 79).
Click New. The Edit High Availability Connection page appears.
2
78 McAfee UTM Firewall 4.0.4 Administration Guide
Configuring high availability.
Customizing the HA script.