Manual Lan Configuration; Registering Your Utm Firewall - McAfee SG310 Administration Manual

Getting Started

Registering your UTM Firewall

Manual LAN configuration

Click Start > Settings > Control Panel, and then double-click Network Connections. If presented with
multiple connections, right-click on Local Area Connection (or appropriate network connection) and
select Properties.
Select Internet Protocol (TCP/IP).
1
Click Properties.
2
Enter the following details:
3
• IP address – An IP address that is part of the same subnet range as the UTM Firewall's LAN connection
(for example, if using the default settings, 192.168.0.2 - 192.168.0.254).
• Subnet mask – Subnet mask of the UTM Firewall's LAN connection (if using the default settings,
255.255.255.0).
• Default gateway – IP address of the UTM Firewall's LAN connection (if using the default settings,
192.168.0.1).
• Preferred DNS server – IP address of the UTM Firewall's LAN connection (if using the default
settings, 192.168.0.1).
Click OK. Repeat for each PC on your network.
4
Quick setup is now complete. Quick setup is all you need to do to get basic network connectivity to the
Internet. Network devices on the LAN should now be able to access the Internet in accordance with the
settings you have configured, and provided that all physical network connections are in place.
Registering your UTM Firewall
You must register your UTM Firewall device in order to receive technical support. A current email address is
required to register your product. Registering online allows you to keep abreast of firmware updates and to
take advantage of your warranty.
The Quick Setup page provides links to the product registration site. You can register your product either
before or after completing the Quick Setup Wizard. If you choose to register later, browse to:
http://my.securecomputing.com, or use the registration links available on Technical Support tab
(Figure 27).
The Technical Support tab is available from every user page by selecting the Help button on the user page,
then selecting the Technical Support tab
Figure 27 Technical Support tab
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 27).
33